Version 6.3: April 11, 2011
====================================
- Improved handling for Epic media
- Changed source unmounting process
- Fixed a issue where multiple checksum dated files were
being generated
- Prevented a crash with invalid sources
- Support for disk read retry tracking
- Supports Cache-A v2.0 software
- Correction to SHA256 mode
Version 6.2.1: December 11, 2010
====================================
- Fixed an error with the apple installer when upgrading from 5.4
in certain situations.
Version 6.2: December 9, 2010
====================================
- Now using PDF help content.
- Changed Quicktime Renders window to correctly indicate new
install process for REDline
- Fixed Cache-A path specification problem.
- Disk cache is now disabled for all file operations.
- Source and destination verify no longer performed if no
checksums are selected.
- Now using POSIX file I/O calls.
- No longer placing space between camera letter and specified
enclosure name.
- Existing sums now only detected at source for copy/checksum
operation.
- Updated UI to use RDM files
- Master progress bar now includes destination progress.
- Improved calculation of ETA at progress endpoints.
- Introduced Sync RMD function
- ETA label now only shown when processing.
- Improved the granularity of progress detection for smoother
progress bars and ETA calculations.
- Fixed problem with destination progress detection.
- Fixed problems with calculation of progress for sources.
- Each source and destination now has it's own independent progress
calculation. The overall source progress is a now calculated
as an average of the individual source progress.
- Added a process ETA indicator.
- Fixed unmount after success.
- Now clearing copy lists when the reset button is clicked.
- Fixed a problem that would cause a crash when canceling a single
destination before the destination verify phase when
destination verify is turned on.
- Fixed a problem where extraordinarily long log entries could
cause a crash.
- Fixed a problem where sums were only written to the first
destination in the list.
Version 6.1: May 16, 2010
====================================
- Fixed a bug that caused extremely slow copies in Mac OS 10.5
- Updated Quicktime Render for RedRocket support
- Updated Quicktime Render for new color science
- Added support for new gamma and color spaces
- Added checking to ensure output codec is supported
- Changed user interface so the buttons and icon display overall
status for all copies
- View Results button now shows all results for all copied folders,
not just the one selected
- Retry All Errors now retries all errors for all sources
- Fixed a bug with verify checksums button not finding original
checksums
- Now shows in the activity log if writing to a destination was
skipped by user preference
- Removed alternate checksum folder option, no longer needed
- Fixed an error when sources would be read even if the copy is
to be skipped to all destinations
Version 6.0: April 14, 2010
====================================
- Support for single source read to multi-destinations
- Unified processing code for Mac and Windows
- Expanded code for new Epic released details
- Fixed a display bug in R3D File Recovery
Version 5.4: November 19, 2009
====================================
- Added ability to store Red Media types with Identifiers.
- Added ability to separate footage based on camera roll number,
with a custom suffix.
- Changed the percentages shown in the copy window to be based
on Gb copied / Gb to copy.
- Added a routine to prevent consumer drives from going to sleep,
enabled in preferences.
- New range of character sizes in timecode window burn.
- Added timestamp and destination list as options to sms/email
reporting.
- New help window discussing options when checksums fail.
- Added detail to explain why registration is invalid or trial
has expired.
- Added more optimizations for Mac OS 10.6
- Fixed registration window close button.
- Fixed bug in display of Red Media Identifiers.
- Fixed bug in display of R3D File Recovery window.
Version 5.3.1: October 16, 2009
====================================
- Fixed bug in stored preference updating.
Version 5.3: October 15, 2009
====================================
- Integration with Cache-A LTO archive devices.
- Preferences are now tabbed.
- Added ability to not auto-scroll the activity log.
- Added new ProRes codecs, removed old Avid codecs.
- Internal log changes.
- Fixed error with calendar date locale for activity log.
- Added 10.6 optimizations.
- Due to changes in preferences, cannot roll back to 5.2.
Version 5.2: August 20, 2009
====================================
- Growl and SMS/Email notifications now include the source path
in the copy status.
- Added the ability to setup Red Media Identifiers in the
preferences and select from them in the Project Information
update window.
- Added preference to remind user to update Project Information
when auto-start is enabled and a new Red Media is mounted.
- Added ability to send logs via email. Not recommended if using
SMS, as the logs are verbose.
- Added a mini-result icon per destination, so the user can see
which destinations erred easily. The icon updates with each
source.
- Now saves a master log in the user's library, and removes old
logs after 30 days.
- Now checks the sources to ensure they exist before starting a
copy.
- When auto-start is enabled and a new Red Media is mounted, the
program will clear from the queue all sources that are
completed and successful. It will then try to copy
everything in the queue again, including previous sources
that have not been removed and were not successful.
- Added the ability to change/update the Project Information
area as the copy is in progress and it will save those to
the ProjectInfomation.txt file.
- Fixed bug in recopying footage after an error.
- Fixed bug in UI updating.
Version 5.1: July 19, 2009
====================================
- Now shows a dialogue box confirming with user if user tries to
quit program while a copy or checksum process is in
progress.
- Added Growl notification support. ( http://www.growl.info )
- Fixed a bug where in certain instances clicking on "Halt"
during a copy process would crash the system.
- Fixed an error where some subsystems were not updating the main
UI about its status.
- Fixed some errors in the program help.
- Small code adjustments for performance.
Version 5.0: July 10, 2009
====================================
- This version requires Mac OS 10.5. Mac OS 10.4 is no longer
supported.
- Added R3D Recovery window with the ability to recover R3D files
from bad media, sort them, re-create folder structures and
reference movies, and print out a report with all the
details.
- Added the ability to save initial checksums to a different
directory, so the Red Media will not be written to during
the copy phase.
- Quicktime Render now has the ability to render multiple clips
at once to make full use of all processors on a system.
- Quicktime rendering can now render to DPX files
- Quicktime rendering can now render to 1/4 4k resolutions.
- Added ability to send a text or email message when it completes
a copy, render or recovery operation.
- Bounce the icon in the dock when recovery, render or copy process
is finished.
- Change the icon to indicate the copy result.
- Copy process will start automatically when Red Media is mounted.
- Added ability to format Red Media, ready for use on the camera
complete with roll number.
- Added an ETA to the copy process.
- Added an ETA to the rendering process.
- Triple check that your destinations exist right before writing.
- Activity Log now has additional detail, detail from the render
and recovery windows
- Activity Log is saveable as a text file.
- Fixed a bug where quicktimes were rendered with a _001 suffix.
- Moved the project information area into a sheet to make better
use of screen real estate.
- Quicktime Render UI is smaller and now fits on smaller screens.
- Added a "step by step" help, which points directly to relevant
items.
Version 4.3: January 23, 2009
====================================
- We fixed an error where some buttons were not properly linked.
During or testing phase everything did check out, but
somehow the release version did not have some buttons
assigned to the proper action.
Version 4.2: January 20, 2009
====================================
- Added ability to only error on R3D files not passing checksum
verification. Other files will just generate a "warning"
not "error"
- Results box now re-sizes correctly and shows errors first.
- Added ability for R3D Data Manager to auto-eject devices that
copied successfully when user presses "reset". It will
warn if it was unable to eject drive.
- Updated Quicktime Render module to change the preferences to
sheets, freeing up screen real estate.
- Added a variety of Avid DNxHD codecs to render to.
- Added 4.5k source option. The Quicktime Render module is ready to
render from RED One 4.5k shot material.
- Added option to only burn TC window on first and/or last frame.
- Added ability to set custom frames in Red One options, and use
those exact settings in R3D Data Manager.
- Re-factored frame masking, more precise.
- Fixed small error where the module would render a shot multiple
times in some rare circumstances.
- Added 1/4 4k output options: 1024x576 and 1024x512.
- Factored frame rendering up through 6k - Red Epic ready.
- Changed GUI to properly show number of frames rendered.
- Links to website from within program.
Version 4.1: November 4, 2008
====================================
- Fixed the Render Resolution. We fixed the code to correctly
parse the render resolution selection and apply it to the
render. This enables much faster render times.
- Updated Options. We updated the options to be more in line with
other RED offerings, for consistency of verbiage.
- Disabled options for RSX/Look management. We added the option
"RSX/Camera Default" to the look options. Previously, the
items set here had to match items in your RSX or R3D file to
get consistent results. Now the options will only override
the RSX or R3D look options if you choose to. In other
words, the "RSX/Camera Default" will use the option as set
in the R3D or RSX file with no further intervention.
- Updated Alerts. We updated the code to alert you if no R3D files
are found in the source path.
- Select a single RDC Folder. Now you can select a single RDC
folder for processing, or a RDM folder.
- Added frames to render. We now show you the current rendering
frame and total number of frames to be rendered for both
the current file and all files.
- Time Stamps. We added time stamps in international format to
the log file.
Version 4.0: October 20, 2008
====================================
- New Quicktime Batch Render window. You can now render R3D files
into other quicktime codecs through our simple interface.
Simply select a few options and start rendering.
- Updated Help menus
- New keyboard shortcuts
Version 3.1: October 9, 2008
====================================
- Improved Detection of Red Media. We have revised the way that
R3D Data Manager detects Red Media (Red CF Card, Red
Drive), which should prevent false positives and
overwriting of ProjectInfomation.txt data.
- Checksum Generation on Red Media Revised. We revised the
checksums generation on Red Media to skip generating
checksums on RDC folders that already have checksum
files. This supposes that the checksums contained in
those files are complete and accurate.
- Revised Menus. We revised the menus in the main window
to make more sense in the new queue workflow.
- Help Menus. We added help menus to all the buttons in the GUI,
to let you know what each button does exactly.
- Keyboard Shortcuts. We added and smoothed out the keyboard
shortcuts. We kept the old shortcuts as much as possible,
except where they were conflicting with system or other
shortcuts. Please look at the help menu for each button
to see the new keyboard shortcuts
Version 3.0: September 20, 2008
====================================
- Added queue support. Now you can select up to 200 sources to copy
to up to 4 destinations. The program will ensure that every
copy is valid.
- Enabled multiple level checking for R3D files, to enable
additional copy passes when "copy digital.*.profile"
option is enabled.
- Fixed timing of transfers.
Version 2.4: Release April 29, 2008
====================================
- Fixed progress bars to display a correct percentage.
- If "When copying from RED Media" option "Erase files after
successful transfer" is enabled, the the RDM folder will
also be deleted along with the RDC folders.
- Enabled copying of digital.*.profile files and log files
from RED Media. If enabled, R3D Data Manager will create
a folder the same as the volume name of the RED Media
and place the digital.*.profile and log files in there,
along with the RDM and RDC folders.
- Trial mode enabled. Now if there is not a valid license,
it will generate a trial key. You will have 30 days
to try R3D Data Manager. Upon the expiration of the 30
days, a valid key will be required.
- Altered code to store checksums in memory, so if the source is
accidentally removed destinations wont be marked as bad.
Version 2.3: Release April 9, 2008
===================================
- Fixed error with text files not being copied.
Version 2.2: Release April 7, 2008
===================================
- Updated application to now handle RED Build 15 directory
structure. It now will handle both the old RDC folders
and RDM/RDC folders in a mixed or separate environment.
- Fixed a memory leak.
- Updated code to copy checksum text files.
- Fixed small issues in the way percentages were being displayed.
Version 2.1: Release March 23, 2008
====================================
- Added indicators to numerically indicate the percentage of data
copied.
- Added indicators to numerically indicate the percentage of data
checksumed.
- New logo.
- Removed duplicate code.
Version 2.01: Release March 16, 2008
=====================================
- Fixed a bug where successful copies were being marked as bad.
Version 2.0: Release March 15, 2008
====================================
- Final release of version 2.0 code
- Removed duplicate code.
Version 2.0b4: Release March 5, 2008
=====================================
- Updated GUI reporting elements.
- Fixed a bug with updates being downloaded incorrectly.
Version 2.0b3: Release March 4, 2008
=====================================
- Fixed code bug where some directories were being mis-reported.
- Fixed GUI positioning elements.
- Added code to catch md5 checksum generation errors.
Version 2.0b2: Release March 3, 2008
=====================================
- Removed internal checks, speeding up code execution by 10%.
- Added license key information
- Added code to check for updates on startup and on user selection.
Version 2.0b1: Release February 20, 2008
=========================================
- First release of new C code, which should improve performance.
- New GUI unveiled.
- Added SHA1 and SHA 256 checksumming options.
- Added ability to transfer to more than one destination at the
same time.
- Added ProjectInformation.txt files which contain info about the
project and transfers.
Version 1.7: Release January 26, 2008
======================================
- Removed internal checks, speeding up code execution by 10%.
Version 1.6: Release January 20, 2008
======================================
- Added ability to view failed transfers in one GUI element.
Version 1.5: Release January 18, 2008
======================================
- Removed duplicate code.
- Added ability to stop transfer in progress.
- Fixed bug in how md5sums.txt files were being written on some
platforms.
Version 1.4: Release January 10, 2008
======================================
- Fixed bug relating to calculation of data to be transferred.
- Added more GUI elements, including new progress bars.
Version 1.3: Release January 8, 2008
=====================================
- Added more GUI elements, including dialog boxes for successful
completion.
- Removed some duplicate code.
Version 1.2: Release January 6, 2008
=====================================
- Added ability to automatically remove files from source, if it
is a RED Media, only on correct transfer.
- Added a small GUI.
Version 1.1: Release January 2, 2008
=====================================
- Added ability to drag and drop from finder.
- Removed duplicate checks to increase speed.
Version 1.0: Release December 12, 2007
=======================================
- First Public Release.
Version 0.9: Release November 29, 2007
=======================================
- Updated code to find system binaries and use them accordingly.
Version 0.8: Release November 10, 2007
=======================================
- First private build released to beta-testers.
